Strip edging machine DUO2000 for the machining of strips with a max. width of 2000 mm. The DUO is often integrated into tube production lines to optimize the weld seam.
The QUATTRO strip edge trimming machine works with up to 12 tools and achieves each contour required.
Dr. Stefanie Lemaire
Phone: +49 202 24742213
E-mail: Send message
The JULIUS strip edging machine of the new generation QUATTRO300/S is designed for strips with a maximum width of 2,000 mm and a maximum thickness of 8 mm as a standard. It is conceived for high-stress processing with high material removal and produce complex contours at the strip edge, respecting tight tolerances.
Thanks to a new conception of support adjustment, the swarf removal is optimized so that it is possible to process with thick swarf and to remove a lot of material in one pass through.
The positioning of the hydraulic clamping system in bilateral guide rails and the use of further cylinders have improved the capacity with the result that the machine processes without vibration, even at high-stress operations.